AstroNav Nano
AstroNav Nano is a compact flight controller and flight-data logger for model rockets and similar vehicles.
It measures motion and environment, detects the flight phases, logs the mission, and can trigger apogee deployment when enabled and properly configured.
Your first flight
Section titled “Your first flight”New to AstroNav Nano? Follow these steps in order.
- SafetyPyro rules and approved hardware
- FirmwareUpdate with AstroNav MC or a UF2 file
- Getting startedFrom unboxing to a mounted Nano
- ConfigureSettings.ini or AstroNav MC
- Pre-flightPower, calibration, recovery
- FlyFlight states and what happens when
- Review the logReplay it in AstroNav MC or read the CSV
Jump to a task
Section titled “Jump to a task”I want to…
- Check my rocket before launchOperating checklist
- Look at my flight dataFlight logs
- Understand what happened in flightFlight states
- Fix a problemTroubleshooting
- Use the desktop appAstroNav MC manual
What AstroNav Nano does
Section titled “What AstroNav Nano does”FIRE_PYRO_APOGEE=FALSE to fly without deployment.At startup, the Nano initializes its sensors and storage, keeps the pyro and servo outputs low, runs health checks, and detects whether it is powered through USB or a battery.
Who it’s for
Section titled “Who it’s for”Real flight data and safe parachute deployment used to need a big rocket and a big budget. The complete flight-ready Nano (board, battery and holder) weighs about 10 grams, so it fits the small rockets most people actually fly.
- Students and schools: predict a flight with AstroNav MC, fly it, and compare the prediction with real data in Mission replay.
- Beginners: get real data from your first rocket, with safety logic that keeps the pyro from firing when it shouldn’t.
- Experienced builders: a 10-gram backup computer, or real avionics in rockets that were always too small for them.
Every board is checked before it flies. See How every board is tested.
Hardware specifications
Section titled “Hardware specifications”| Specification | Details |
|---|---|
| Dimensions | 16 mm by 13.6 mm |
| Power supply | 1S or 2S LiPo or USB (5V), with reverse polarity protection |
| IMU sensor | ICM-45686 |
| Barometer sensor | BMP581 |
| Power consumption | 0.1 W |
| Maximum G force | 32 G |
| Logging | 20 samples per second |
| Flight storage | 2 MB flash: about 12 typical 60-second flights |
| USB modes | Serial communication, mass storage |
| Outputs | 1 pyro channel for parachute deployment, 2 RGB status LEDs |
| Expansion | GPIO 2 and GPIO 3 (UART, I²C, PWM) |
| Microcontroller | Raspberry Pi RP2350A |
Design files and license
Section titled “Design files and license”- Hardware design files (schematic, PCB, BOM) and the 3D printable holder and case are on the OSHWLab project page.
- Firmware source code is on GitHub.
- AstroNav Mission Control is a free, closed-source desktop app. Download it from the releases page.
The firmware, hardware design files, 3D printable files and this documentation are licensed under CC BY-NC 4.0. You may study, modify and share them and build boards for your own use, with credit to YoupSpace. Selling boards, kits or derivatives needs written permission. Because of that non-commercial clause, AstroNav Nano is source-available, not “open source” by the OSHWA or OSI definition.